Rechargeable AAA NiMH Batteries &
Chargers
NiMH batteries require a NiMH battery charger.
The current or mAh (milliamp hour)
rating of a battery is an indication of the battery capacity or how long it will
last on a charge, the higher the better.
Chargers
| Outline |
Model |
Description |
Price |
Order |
 |
CHG-1000DC
(NiCd & NiMh smart charger) |
Charges two or four AA or AAA NiMH
or NiCd batteries. Includes 4 2600mAh NiMH AA batteries.
110-240v operation
includes car cord |
$41.79Cdn
($41.79US)
not available until June 15 |
|
 |
MSCAA
(NiMh smart charger) |
Charges two or four AA or AAA NiMH batteries. Includes 4 2500mAh NiMH AA batteries.
110-240v operation
includes car cord |
$41.79Cdn
($41.79US) |
|
 |
PRO541
(NiCd & NiMH charger) |
Charges up to 4 AA, AAA, C, D, or 2 - 9volt batteries
in 5-8 hours. Reverse polarity & short circuit protection. NiCd NiMH
switchable.
120 volt input. |
$39.00Cdn
($39.00US) |
|
Ni-MH batteries should be charged with a NiMH compatible charger.
1 year warranty and no questions asked 1 month return policy
C9000 WizardOne Charger-Analyzer for 4 AA / AAA Batteries
Give your Batteries a proper break-in
(Let the MH-C9000 take care of your new batteries in ways that no other chargers
can! New batteries, as well as those that have been sitting on the shelf, are
often deactivated. The "break-in" feature is a unique charge-discharge cycle
which forces a full charge into the battery at a very slow rate. This automatic
process will maximize the performance of new batteries and revitalize old ones)
When a single AA or AAA battery fails, it will drag down the performance of the
whole set. Use the Charger-Analyzer to find and repair the weakest link.
| Outline |
Model |
Description |
Price |
Order |
 |
C9000
(AA & AAA NiMh smart charger and analyzer) |
see below
Programming & Display |
$69.95Cdn
($69.95US) |
|
Four independent slots
It's like having four charger-analyzers for AA and AAA NiMH / NiCD batteries.
Large backlit LCD display
Digitally displays capacity, voltage, time and current.
Endless programming possibilities - over 10,000 ways!
29 selectable charging and discharging rate. Charging current from 0.2A to 2.0A
and discharging current from 0.1A to 1.0A in 0.1A increments.
Five modes of operation
Charge: Recharges the battery at the selected rate.
Suitable for batteries used frequently.
Refresh & Analyze: Charges the battery, rest for one hour, discharge,
rest again, then recharges it. Selectable charging and discharging rate.
Suitable for batteries stored for more than two weeks but less than 3 month or
those showing poor performance.
Break-In: Also known as IEC capacity measurement and "Battery Forming".
Charges battery at 0.1C for 16 hours, rest for one hour, discharges battery at
0.2C, then recharges again at 0.1C for 16 hours.
Suitable for new batteries and those stored for more than 3 month.
Discharge: Discharges the battery at the selected rate.
Cycle: Performs charge-discharge cycle for up to 12 times with discharge
capacity stored in memory. Recharges battery after final cycle.
New ways to take care of your batteries and maximize runtime!
Battery Matching
In most devices, usually two or more batteries are used together. When batteries
are used in a series, the performance is limited by the worst one. In other
words, one poorly performing battery can significantly reduce the device
runtime.
Battery matching refers to grouping batteries with similar “actual” capacity. To
perform this, use the Refresh & Analyze mode to determine the battery capacity.
Group batteries with capacity within about +/- 5% of the rated capacity.
Battery Forming
New batteries and those stored for extended period become chemically
deactivated. Battery forming is a charge-discharge-charge cycle which forces a
full charge into the battery at a very slow rate. This process activates the
battery. In certain cases, it needs to be repeated two or three times.
Battery forming can be performed using the Break-In mode.
Delivers just the right charge
Independent negative delta V, temperature and timer protection eliminates over
and undercharging.
Super light travel worldwide power supply and 12V compatible
Worldwide 100-240V switching adapter - light weight and small. Also
compatible with 12V input. Will work on car when used with the optional
cigarette lighter adapter.
Professional, fast & smart AA, AAA, C,
D, battery charger
| Outline |
Model |
Description |
Price |
Order |
 |
MH-C808M
(NiCd & NiMh smart, fast charger)
Batteries not included. |
Charge 8 AA , AAA, C, D batteries
Details |
$115.00Cdn
($115.00US) |
|
There is a $12.00Cdn ($12.00US) shipping and handling charge.
1 year warranty and no questions asked 1 month return policy
